How to Update the Firmware and Driver of MP2 Pico Projecor to Be Compatible with Windows 7?

To whom purchased our MP2 pico projector and use EzDisplay 2.03 version driver (compatible with Windows 2000/XP/Vista), if you need the pico to work under Windows 7, please update the firmware and driver EzDisplay 3.00 (or EZDisplay 3.01).

MP2 Pico Projector

MP2

Please follow the instructions below:

1. Data Backup: First, please backup the data (videos, images, docs, etc) on your pico projector because firmware update will remove all data on the pico.

2. Firmware Download: Please click the icon below to download and save the firmware "MP2 firmware update -091201.rar" to your computer.

3. Firmware Update: Please follow the steps below to update firmware.

MP2

MP2

MP2

MP2

MP2

MP2

Note: Please do NOT interrupt during the procedure.

MP2

3. Removing Old Driver: Remove the old EzDisplay 2.03 driver on your computer if you installed it before.

MP2

MP2

MP2

Click "Finish" to complete uninstallation.

MP2

4. Installing New Driver: Turn on the projector again and you will see the mass storage named “EzDisplay”. Double-click the “EZDisplay_V3.01_Setup” and follow the istructions to install the driver.

MP2

MP2

MP2

MP2

MP2

MP2

5. Reboot the PC while the installation is completed.
6. When the reboot finish, select “EZ display” in the program file. 

MP2 7. Click Display device and then click any mode you like to project from PC.

MP2

8. Please always run EzDisplay before you power on the pico projector


Please feel free to contact us if you have further question.